Printing Information Pages; Printing A Font Sample List; Printing A Directory List; Printing The Print Quality Test Pages - Lexmark X54x Series User Manual

Printing

Printing information pages

For more information on printing these pages, see "Printing menu settings pages" on page 33 and "Printing a network
setup page" on page 33.

Printing a font sample list

To print samples of the fonts currently available for your printer:
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the arrow buttons until Reports appears, and then press
4
Press the arrow buttons until Print Fonts appears, and then press
5
Press the arrow buttons until PCL Fonts, PostScript Fonts, or PPDS Fonts appears, and then press
.
After the font sample list prints, Ready appears.

Printing a directory list

A directory list shows the resources stored in flash memory or on the hard disk.
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the arrow buttons until Reports appears, and then press
4
Press the arrow buttons until Print Directory appears, and then press
After the directory list prints, Ready appears.

Printing the print quality test pages

Print the print quality test pages to isolate print quality problems.
1
Turn the printer off.
2
Hold down and the right arrow button while turning the printer on.
3
Release the buttons when the dots appear, and wait for CONFIG MENU to appear.
4
Press the arrow buttons until PRINT_QUAL_TXT appears, and then press
The print quality test pages print.
5
Press the arrow buttons until Exit Config Menu appears, and then press
Resetting the Printer appears briefly, and then Ready appears.
.
.
.
.
.
.
.
.
71