2GZ/2G1-2
(11) The leading edge of the image is sporadically misaligned
Print example
Feed clutch, paper feed clutch, MP
paper feed clutch or registration
clutch installed or operating incor-
rectly.
(12) Paper creases.
Print example
Paper curled.
Paper damp.
Defective pressure springs.
Defective separation.
(13) Offset occurs.
Print example
Defective cleaning blade.
Defective fuser unit.
Wrong types of paper.
(14) Image is partly missing.
Print example
Paper damp.
Paper creased.
Drum condensation.
Dirty or flawed drum.
1-4-36
Causes
Causes
Causes
Causes
Check procedures/corrective measures
Check the installation position and operation of each clutch.
If any of them operates incorrectly, replace it.
Check procedures/corrective measures
Check the paper storage conditions.
Check the paper storage conditions.
Replace the pressure springs.
Check the drum separation claws and heat roller separation
claws.
Check procedures/corrective measures
Replace the drum unit (see page 1-5-14).
Check the heat roller and press roller.
Check if the paper meets specifications. Replace paper.
Check procedures/corrective measures
Check the paper storage conditions.
Change the paper.
Perform the drum refresh operation.
Perform the drum refresh operation. If the drum is flawed,
replace the drum unit (see page 1-5-14).