The test page is not printed.
Set IP is unable to automatically
detect printers.
The printer does not print.
Downloaded From ManualsPrinter.com Manuals
Windows Problems
Problem
Solution
Turn off the printer, then turn it back on.
1. Check LAN cable is connected to the printers.
• Check LAN cable is connected to the printers
yourself.
• Make sure that there are the connected printers
shown in network neighborhood. If not, check
the communication status of the printers.
• If IP address is assigned to the computers, try
ping command. Make sure the computers and
printers are on the same network segment.
2. If LAN is connected by routers, Set IP is unable
to detect the printers.
3. Check entry values of IP address, subnet
mask and default gateway.
Check IP address
Check Model name of the driver
Try add a port
Refer to the "Set IP"
S
6.7
OLVING PROBLEMS
6