Installing Printer Software In Windows; Installing Software For Local Printing - Ricoh Aficio BP20N User Manual

2.18
S
ETTING
Downloaded From ManualsPrinter.com Manuals

Installing Printer Software in Windows

System Requirements
Verify the following:
• At least 32 MB (Windows 9x/Me), 64 MB (Windows 2000/NT),
128 MB (Windows XP) or more of RAM is installed on your PC.
• There is at least 300 MB of free disk space on your PC.
• All applications are closed on your PC before beginning
installation.
• You are using Windows 95, Windows 98, Windows Me,
Windows NT 4.0, Windows 2000, or Windows XP.
• You are using at least Internet Explorer 5.0.

Installing Software for Local Printing

A local printer is a printer directly attached to your computer using the
printer cable supplied with your printer, such as a USB or parallel cable.
If your printer is attached to a network, skip this step and go to
"Installing Software for Network Printing" on page 2.24.
You can install the printer software using the typical or custom method.
N
: If the "New Hardware Wizard" window appears during the
OTE
installation procedure, click
close the window, or click
Typical Installation
This is recommended for most users. All components necessary for
printer operations will be installed.
1
Make sure that the printer is connected to your computer
and powered on.
2
Insert the supplied CD-ROM into your CD-ROM drive.The CD-ROM
should automatically run, and an installation window appears.
U Y P
P OUR RINTER
in the upper right corner of the box to
Cancel
.