Software Did Not Install - Lexmark Pro900 Series User Manual

2
Remove the printhead.
Warning—Potential Damage: Do not touch the printhead nozzles.
3
Wipe the printhead contacts using a clean, lint-free cloth.
4
Reinsert the printhead, and then close the latch until it clicks.
5
Close the printer.
Note: If removing and reinserting the printhead does not resolve the error, then contact technical support.

Software did not install

If you encountered problems while installing, or if your printer does not appear in the list in the Printers folder or as
a printer option when sending a print job, then try removing and reinstalling the software.
Before you reinstall the software, do the following:
M
AKE SURE THAT YOUR COMPUTER MEETS THE MINIMUM SYSTEM REQUIREMENTS LISTED ON
THE PRINTER BOX
T
EMPORARILY DISABLE SECURITY PROGRAMS IN
W
INDOWS BEFORE INSTALLING THE SOFTWARE
Troubleshooting
138