Printing Ipds From Psf/400 With Os/400 V3R2 - Lexmark Optra K 1220 Installation And User Manual

5.6 Printing IPDS from PSF/400 with OS/400
V3R2
Install the latest cumulative PTF fix pack or tape for the system.
PTF 41993, which is available from IBM, provides a fix for out of paper
responses from the printer.
1. Set up and start the TCP/IP network:
Create a Token-Ring or an Ethernet line description for the printer
using CRTLINTRN or CRTLINETH.
Add a TCP/IP interface using ADDTCPIFC.
Add a router definition, if required, using ADDTCPRTE.
Start TCP/IP using STRTCP.
2. Create a printer device description using CRTDEVPRT (see steps below and the
example on page 83).
Note:
At the command line, type: CRTDEVPRT and press <F4>. Enter the following
information:
Device description
(User defined name)
Device class
Device type
Device model
Press <ENTER>
Only the required fields are listed below.
OPTRA
*RMT
*IPDS
0
77