Lexmark Optra K 1220 Installation And User Manual page 125

13. Problem:
IPDS jobs will not work with Job Buffering set to On.
Solution:
The host expects immediate responses from the printer during job processing.
Buffering a job to the disk delays the return of these responses.
Set Job Buffering = Off under the NETWORK OPTION X menu.
14. Problem:
I get the message Not enough memory for IPDS.
Solution:
The SIMM for IPDS requires a minimum of 4 MB of installed memory. Add
additional memory to activate IPDS printing. If less than 4 MB is installed, the
IPDS Menu settings can still be accessed and configured, but IPDS jobs can not
be printed from the host. Jobs may be printed using other emulations.
15. Problem:
I get the message Recycle PWR to activate value.
Solution:
A host session was established and was idle when you changed settings. The
settings changed had already been reported to the host.
Power the printer Off then On. This causes the host to request the new printer
settings.
125