Lexmark Optra K 1220 Installation And User Manual page 20

4. Refer to the figure below for your printer to locate the SIMM for IPDS in the
connector slot. Push out on the metal clips at each end of the connector and rotate
the SIMM away from the system board.
Optra S/Se
Optra K
5. Place the SIMM for IPDS in its original packaging. If you did not save the
packaging, wrap the card in paper and store it in a box.
6. Close the Printer System Board. Refer to your printer User's Guide and follow the
instructions on how to close the Printer System Board. After closing the Printer
System Board, proceed to step 7.
7. Reconnect the printer cables.
8. Plug in the printer power cord.
9. Turn the printer power On (I).
20