Figure 4-2 Removing The Hdd Pack Cover; Figure 4-3 Removing The Hdd Unit - Toshiba Tl000LE User Manual

4.
Remove the four screws (tap screws) (D) from the HDD·pack ~d remove the pack
cover (E) while sliding it toward the HDD pack handle.
(0)
Tap screw
( l
(D)
Tap screw
\~t--Cr
~
-
~~
Figure 4-2 Removing the HDD pack cover
5. Remove the four screws (inch screws) (F) and remove the HDD pack cover from the
HDD unit (0).
NOTE:
If the HDD unit is a Conner CP2024, the HDD is secured to the
HDD pack cover from the bottom, and not the side, with four screws.
6. Remove the HDD flexible cable (FPC FHDC02) (H) from the HDD unit.
screws
Inch screws
Figure 4-3 Removing the HDD unit
7. To install the HDD unit, follow the above procedure in reverse.
4-7