Toshiba Tl000LE User Manual page 86

3.22
FLOPPY DISK COpy
This command copies floppy disks.
3.22.1 Program Description
This program copies data from a source floppy disk to a target floppy disk.
3.22.2 Operations
1.
After running MS-DOS, insert the Diagnostics Disk in the floppy disk drive. Type
in A:FDCPY and press Enter. The following message appears:
FLOPPY DISK FORMAT & COpy : Vx.xx
Type select (O:2DD-2DD,1:2D-2D,2:2D-2HD,3:2HD-2HD) ?
2. Select a media/drive type number. Type the number. The following message will
appear:
Insert source disk into drive A:
Press any key when ready.
3. Remove the Diagnostics Disk from the FDD and insert the source disk; press any key.
3-52
The following message will appear and the copying to memory begins.
[FDD TYPE]: TRACK
=
xxx
[FDD TYPE]: HEAD
=
x
[FDD TYPE]: SECTOR
=
xx
Copy start
[[ track,head
=
xxx x ]]
Insert target disk into drive A:
Press any key when ready.