Installing Software For Network Printing; Before Installing Printer Software - Lexmark C734DN Connection Manual

Mac instructions for a locally attached printer

Before installing printer software

A locally attached printer is a printer that is connected to a computer using a USB cable. When setting up this type of printer,
you should install the printer software before connecting the USB cable. For more information, see the setup documentation
that came with the printer.
The Software and Documentation CD can be used to install the necessary printer software.
Creating a queue in the Print Center or Printer Setup Utility
For local printing, you need to create a print queue:
1
Install a PostScript Printer Description (PPD) file on the computer. A PPD file provides detailed information to the Mac
computer about the capabilities of the printer.
a
Insert the Software and Documentation CD.
b
Double-click the installer package for the printer.
c
From the Welcome screen, click Continue, and then click Continue again after viewing the Readme file.
d
Click Continue after viewing the license agreement, and then click Agree to accept the terms of the agreement.
e
Select a Destination, and then click Continue.
f
From the Easy Install screen, click Install.
g
Enter the user password, and then click Okay. All the necessary software is installed on the computer.
h
Click Close when installation is complete.
2
Open the Finder, click Applications, and then click Utilities.
3
Double-click Print Center or Printer Setup Utility.
4
Verify that the print queue was created:
•
If the USB-attached printer appears in the Printer list, then quit the Print Center or Printer Setup Utility.
•
If the USB-attached printer does not appear in the Printer list, make sure that the USB cable is properly connected and
the printer is turned on. After the printer appears in the Printer list, quit the Print Center or Printer Setup Utility.
Mac instructions for network attached printers

Installing software for network printing

To print to a network printer, each Macintosh user must install a custom PostScript Printer Description (PPD) file and create a
print queue in the Print Center or Printer Setup Utility.
1
Install a PPD file on the computer.
a
Insert the Software and Documentation CD.
b
Double-click the installer package for the printer.
c
From the Welcome screen, click Continue, and then click Continue again after viewing the Readme file.
d
Click Continue after viewing the license agreement, and then click Agree to accept the terms of the agreement.
e
Select a Destination, and then click Continue.
f
From the Easy Install screen, click Install.
g
Enter the user password, and then click OK. All the necessary software is installed on the computer.
h
Click Close when installation is complete.
Connection Guide
Page 4 of 5