Infrared Menu - Lexmark C912 User Reference Manual

Menu Item Purpose
Staple Job To set stapling as the default for all
print jobs. (Select stapling from the
printer driver if you want to staple
only specific jobs.)
Staple Prime To specify the paper source you
want the printer to use when it
Src
primes the stapler. When a staple
cartridge is replaced or a staple
jam is cleared, the printer may
need to prime the stapler by
stapling a sheet of paper several
times.

Infrared Menu

The Infrared Menu is only displayed when at least one infrared interface exists on the printer.
Note: Values marked by an asterisk (*) are the factory default settings
Menu Item
Infrared Port
PCL SmartSwitch
PS SmartSwitch
NPA Mode
Using printer menus
Purpose
Whenever the value of the NPA Mode, Infrared Port, or Job Buffering is changed
from the operator panel, the printer automatically restarts upon exiting the
menus in order to reconfigure memory.
Note: Only one of the installed infrared ports are displayed. If there are multiple
infrared ports available, the user cannot specify which one will be activated. The
first option is always enabled (for example, the option with the lowest slot
number).
=Disabled*
=IR Option X
Only displayed when both PCL and PostScript interpreters are
Note:
available AND
Infrared Port is not set to Disabled.
=Off
=On*
Note: Only displayed when both PCL and PostScript interpreters are available
AND Infrared Port is not set to Disabled.
=Off
=On*
Whenever the value of the NPA Mode, Infrared Port, or Job Buffering is changed
from the operator panel, the printer automatically restarts upon exiting the
menus in order to reconfigure memory.
Note: Only displayed when Infrared Port is not set to Disabled.
=Off
=Auto*
Infrared Menu
Values
Off* Does not staple print jobs.
On Staples each print job sent to the
printer.
Tray <x> Selects paper from the specified
(Tray 1*) tray.
MP Feeder Selects paper from the
multipurpose feeder.
55
.