Lexmark C912 User Reference Manual page 114

Message
63 Unformatted Disk
64 Unsupported Disk
Format
80 Belt
Exhausted
80 Belt
Life Warning
80 Fuser/Belt
Exhausted
80 Fuser/Belt
Life Warning
80 Fuser
Exhausted
Understanding printer messages
What this message means
The printer detects an
unformatted hard disk.
The printer detects an
unsupported disk format.
The transfer belt has reached its
end of life.
The transfer belt is nearing its
end of life. If you do not have a
transfer belt on hand, order one
now. You can print approximately
500 pages before the 80 Belt
Exhausted message appears.
The transfer belt and fuser have
reached their end of life.
The transfer belt and fuser are
nearing their end of life. If you do
not have a replacement transfer
belt and fuser, order them now.
You can print approximately 500
pages before the 80 Belt/Fuser
Exhausted message appears.
The fuser has reached its end of
life.
Understanding printer messages
109
What you can do
• Press Go to clear the message
and continue printing.
• Format the disk before performing
any disk operations. To format the
disk, select Format Disk from the
Utilities Menu.
• If the error message remains, the
hard disk may be defective and
require replacing. Install a new
hard disk and format it.
• Press Go to clear the message.
• Format the disk.
Note: Disk operations are not allowed
until the disk is formatted.
Replace the transfer belt.
See also:
Replacing the transfer belt
Press Go to clear the message and
continue printing. The Supplies
message is displayed until you
replace the transfer belt.
See also:
Replacing the transfer belt
Replace the transfer belt and fuser.
See also:
Replacing the transfer belt;
Replacing the fuser
Press Go to clear the message and
continue printing. The Supplies
message is displayed until you
replace the transfer belt and fuser.
See also:
Replacing the transfer belt;
Replacing the fuser
Replace the fuser.
See also:
Replacing the fuser