Cleaning the LEDs
If you are experiencing print quality problems such as voids, light streaks, or light print, you may need
to clean the LEDs inside the top cover.
Note: For instructions on opening the top cover, see
1
Complete the steps to open the top cover.
2
Remove all toner cartridges. See
CAUTION:
The photodevelopers are hot! Allow the photodevelopers to cool before touching.
Warning:
Exposing the photodeveloper to light for prolonged periods of time can damage it.
Do not expose the photodeveloper to light for more than ten minutes. Fingerprints
Maintenance
Removing a toner cartridge
Cleaning the LEDs
173
Opening the top
cover.
for more information.