Options For Standby Mode; Options For Navigation Buttons - Topfield TF-S3000CHD User Manual

High definition digital satellite receiver usb pvr-ready common interface conax imbedded

Hide thumbs Also See for TF-S3000CHD:

Table of Contents

4.8 Options for standby mode

You can have the current time displayed on the front display

in standby mode. Select the Settings > Others menu and set

the Standby Mode option to Active; otherwise, set it to Passive.

When you set the Standby Mode option to Active, the receiver

can also bypass the signal from the antenna. Pressing the

button on the Active option displays sub-options that are Seg-

ment and LNBP settings. By default, these two options are set

to On in active standby mode, but either of them can be turned

oﬀ as your preference. To turn oﬀ the current time display, set

the Segment option to Oﬀ. To turn oﬀ the antenna bypass set-

ting, set the LNBP (LNB Power) option to Oﬀ.

To save power consumption, you might as well set the Auto-

matic Power Down option to Enable. With this option enabled,

the receiver will be turned oﬀ automatically when there is no

manipulation over three hours.

By default, pressing the

rent service to another right away. However, you can set these

buttons to only browse service events on the information box

without swtiching the current viewing.

Select the Settings > Others menu and set the Event Navi-

gation option to Enable. Pressing the

allows you only to browse other service names on the infor-

mation box. If you want to switch to the selected service event,

you can press the

If you do not want this event navigation ability, set the Event

Navigation option to Disable.

4.8 Options for standby mode 39

¢ ¡

button.

button switches the cur-

¢ ¡

button now

¢ ¡

Table of Contents