Options For Standby Mode; Options For Epg Style - Topfield CRC-1400 User Reference

32 Preference Settings

4.10 Options for standby mode

4.11 Options for EPG style

To change the time interval of slideshow, select the Settings >
Miscellaneous menu, and then set the Slideshow Time Interval
option as you desire. Its available range is 3 to 10 seconds.
To change the effect of slideshow, select the Settings > Mis-
cellaneous menu, and then set the Slideshow Effect option as
you desire. There are four types of effects as follows:
Overlap overlaps the current picture and a following picture.
Cover covers the current picture with a following picture.
Move moves the current picture and displays a following pic-
ture.
Mosaic displays a following picture with a mosaic effect.
To use those effects ramdomly, set this option to Random. The
default value is Random.
You can have the current time displayed on the front display
in standby mode. Select the Settings > Miscellaneous menu
and set the Standby Mode option to Active; otherwise, set it
to Passive. When you set the Standby Mode option to Active,
the receiver can also bypass the signal from the antenna. To
save power consumption, you might as well set the Automatic
Power Down option to Enable. With this option enabled, the
receiver will be turned off automatically when there is no ma-
nipulation over three hours.
In the EPG mode you can toggle the basic EPG plate to a matrix
format or a single display format.