Controlling The Digital Receiver - Topfield TF-S3000CHD User Manual

High definition digital satellite receiver usb pvr-ready common interface conax imbedded
Hide thumbs Also See for TF-S3000CHD:
Table of Contents

Advertisement

2 Introduction

1.2 Controlling the digital receiver

• Can store up to 10,000 television and radio services.
• You can edit the services list.
• Can create lists of your favourite services.
• Can view information about the current television or ra-
dio programme.
• Has an electronic programme guide that provides an
overview of scheduled programmes.
• Time-shift is a special technical feature available on this
digital receiver. You can pause a programme you are
watching and resume it again at a later time. Then you
can quickly go to any part of the current programme by
fast forward or rewind search.
• If you have an external hard drive connected to the dig-
ital receiver via the USB port, you can record television
programmes into it.
• You can use various Web services including YouTube.
(optional)
You can operate the digital receiver with the remote control or
the buttons on the front panel.
NOTE
When the digital receiver is off but plugged into a wall
socket, we say that it is in standby mode; on the other hand,
when it is on, it is in active mode. Even when you are not
using the digital receiver, you should keep it plugged into
a wall socket to be in standby mode so that it can run timer
events at any time.

Advertisement

Table of Contents
loading

Table of Contents