Fan Mode; Sleep Mode - Vivax ACP-09CH25ZNM User Manual

4.

FAN mode

In this mode, the outdoor unit does not operate. The indoor fan alone
operates.
Press MANUAL SWING button or SWING button to change up/down air
flow direction.
Press FAN SPEED button to change the fan speed of indoor unit.
5.
HEAT mode (only applied to heat pump type)
¡ ±
Press MANUAL SWING button or SWING button to change up/down air
flow direction.
Press FAN SPEED button to change the fan speed of indoor unit.
Press TEMPERATURE ADJUSTMENT button to change the set temperature.
6.

SLEEP mode

Sleep mode in cooling and drying running.
A. The indoor fan runs at low speed.
B. After one hour of operation the set temperature will increase by 1 .
One hour later, the set temperature will increase by 1
The unit will then continue operating at 2
Sleep mode in heating running.
A. The indoor fan runs at low speed.
B. After one hour of operation the set temperature will decrease by 2 .
One hour later, the set temperature will decrease by 2
The unit will then continue operating at 4
¡ ±
4
once more.
above the set temperature.
once more.
below the set temperature.
KY-02A(B)