Printer Does Not Feed Paper, Envelopes, Or Specialty Media; Banner Paper Jams - Lexmark 1300 Series User Manual

Solution 4
Adjust the paper guide:
•
When using media less than 8.5 inches wide
•
Against the left edge of the paper or media, making sure it does not buckle

Printer does not feed paper, envelopes, or specialty media

Solution 1
If there is a paper jam, see "Jams and misfeeds troubleshooting" on page 44.
Solution 2
Verify that the specialty media is loaded correctly.
Solution 3
Try loading one page, envelope, or sheet of specialty media at a time.
Solution 4
Make sure the printer is set as the default printer and is not on hold or paused.
1
Click:
•
For Windows XP Pro: Start
•
For Windows XP Home: Start
•
For Windows 2000 or Windows Vista: Start
2
Double-click the name of your printer.
3
Click Printer.
•
Make sure no check mark appears next to Pause Printing.
•
Make sure a check mark does appear next to Set As Default.

Banner paper jams

1
Press to turn off the printer.
2
Remove the jammed banner paper from the printer.
To keep a banner print job from jamming:
•
Use only the number of sheets needed for the banner.
•
Select the following settings to enable the printer to feed paper continuously without jamming:
1
With a document open, click File
2
Click Properties, Preferences, Options, or Setup.
3
Select the Paper Setup tab.
4
From the Paper Size area, select Banner.
5
Select Letter Banner or A4 Banner as the paper size.
Settings Printers and Faxes.
Control Panel Printers and Faxes.
Settings
Print.
45
Printers.