Paper Or Specialty Media Misfeeds; Printer Does Not Feed Paper, Envelopes, Or Specialty Media - Lexmark 1500 Series User Manual

5
Press .
6
On your computer, delete or stop the print job, and then try sending it again.

Paper or specialty media misfeeds

These are possible solutions if paper or specialty media misfeeds or skews, or if multiple sheets feed or stick together.
Try one or more of the following:
Check paper condition
Use only new, unwrinkled paper.
Check paper loading
•
Load a smaller amount of paper into the printer.
•
Load paper with the print side facing you. (If you are not sure which side is the printable side, see the instructions
that came with the paper.)
See "Loading paper" on page 28 and its related topics for information about:
•
Maximum loading amounts per paper type
•
Specific loading instructions for supported paper and specialty media
Remove each page as it is printed
Remove each page as it exits, and let it dry completely before stacking.
Adjust the paper guides
Adjust the paper guides:
•
When using media less than 8.5 inches wide
•
To rest against the edges of the paper or media, making sure it does not buckle

Printer does not feed paper, envelopes, or specialty media

These are possible solutions. Try one or more of the following:
Check for paper jams
Check for and clear any paper jams. For more information, see "Paper jam in the printer" on page 97 and "Paper
jam in the paper support" on page 97.
Check media loading
•
Verify that the specialty media is loaded correctly. For more information, see "Loading paper" on page 28.
•
Try loading one page, envelope, or sheet of specialty media at a time.
1
2
99