Cleaning The Exterior Of The Printer - Lexmark 1500 Series User Manual

4
Using another clean section of the cloth, gently hold the cloth against the contacts for about three seconds, and
then wipe in the direction shown.
5
With another clean section of the cloth, repeat step 3 and step 4.
6
Let the nozzles and contacts dry completely.
7
Reinsert the print cartridges.
8
Print the document again.
9
If the print quality does not improve, clean the print nozzles. For more information, see "Cleaning the print
cartridge nozzles" on page 59.
10
Repeat step 9 up to two more times.
11
If print quality is still not satisfactory, replace the print cartridges.

Cleaning the exterior of the printer

1
Make sure that the printer is turned off and unplugged from the wall outlet.
CAUTION: To avoid the risk of electric shock, unplug the power cord from the wall outlet and disconnect
all cables to the printer before proceeding.
2
Remove paper from the paper support and paper exit tray.
3
Dampen a clean, lint-free cloth with water.
Warning: Do not use household cleaners or detergents, as they may damage the finish of the printer.
4
Wipe only the outside of the printer, making sure to remove any ink residue that has accumulated on the paper
exit tray.
Warning: Using a damp cloth to clean the interior may cause damage to your printer.
5
Make sure the paper support and paper exit tray are dry before beginning a new print job.
60