Installing The Scanner - Lexmark T64x Setup Manual

Installing the scanner

CAUTION: The scanner requires two people to lift it safely.
1
Extend the scanner shelf.
2
Align the two holes on the bottom of the scanner with the two forward holes in the shelf, and then place the
scanner base on the shelf.
3
Insert the two thumbscrews through the bottom of the shelf and into the bottom of the scanner. Tighten both
thumbscrews securely.
4
Align the hinges on the scanner top with the slots in the scanner, and then lower the scanner top onto the scanner.
For information on removing the scanner top, see "Removing the scanner top" in the User's Guide located on
the Software and Documentation CD.
5
Connect the two scanner cables.
Note: To prevent errors and scanner malfunction, make sure the scanner cable thumbscrews are tightened
securely.
6
Go to Removing the print cartridge packaging on page 32.
Go to page 32
MFP Adjustable stand setup
Installing the scanner
17