Customizing Your Mfp Option - Lexmark T64x Setup Manual

Customizing your MFP option

You can customize your MFP with various input, output, and memory options.
Note: Leave all components and hardware in the boxes until you are ready to install them.
Check the boxes you received to make sure you have all the necessary components for the configuration you ordered.
Install the printer and any options you have purchased in the following order:
CAUTION: If you are installing options after setting up the printer, turn the printer off, and unplug the power cord from
the wall outlet before continuing.
1
Scanner stand, furniture stand, or caster base
2
2000-sheet drawer
3
250-sheet or 500-sheet drawer
4
Duplex unit
5
Printer
6
Scanner shelf or output options
7
MFP option (scanner)
The following options are available for your MFP.
Note: Additional options may be available for your MFP.
Input options
250-sheet drawer
500-sheet drawer
2000-sheet drawer (letter/A4)
250-Sheet Universally Attached Tray with Drawer
400-Sheet Universally Attached Tray with Drawer
Envelope feeder
CAUTION: Floor-mounted configurations require additional furniture for stability. You must use
either a printer stand or caster base if you are using a 2000-sheet drawer. Certain other configurations
also must have a printer stand or caster base. More information is available on our Lexmark Web site
at www.lexmark.com/multifunctionprinters.
Getting started
Output options
Output expander
5-bin mailbox
High capacity output stacker
StapleSmart™ finisher
Customizing your MFP option
10
Other options
Duplex unit
Spacer
Scanner shelf
Caster base
Scanner stand
Furniture stand