Unlocking The Scanner; Attaching Cables And Power Cords - Lexmark T64x Setup Manual

Unlocking the scanner

1
Locate the lock switch on the side of the scanner, and then slide the switch down.
2
Lift the scanner feed tray up until it locks into position.

Attaching cables and power cords

1
Connect the scanner cable to the scanner and printer.
2
Connect the printer to a LAN drop or hub using standard cabling that is compatible with your network.
3
Connect the RJ-11 telephone fax line cable into the left modem port on the back of the scanner.
Note: Germany: Use only the German TAE type F adapter shipped with this product, because it contains
a billing tone filter. The adapter is designed only for the F connector of the German wall outlet. This
must be the only device attached to the NFN wall receptacle.
Switzerland: Use only the Swiss adapter shipped with this product, because it contains a billing tone
filter.
4
If you received a telephone adapter specifically designed for use in your country or region, attach the telephone
adapter to the telephone fax line cable, and plug the fax line cable into the phone line outlet.
To connect a telephone to the MFP, plug the telephone into the right modem port on the back of the scanner.
Step 1
Scanner setup
Step 2
Unlocking the scanner
43
Step 3