Carrier Transport Motor Removal; Handset And Cradle Removal - Lexmark 4200 Series Service Manual

4413-XXX

Carrier transport motor removal

1. Remove the top cover assembly. Go to the
assembly removal" on page
2. Remove the print engine. See
page 4-16.
3. Manually move the carrier to the center of the machine.
4. Press the idler pulley and remove the belt from the carrier
transport pulley.
5. Disconnect carrier transport motor from the system board.
6. Remove the two screws (A) from the carrier transport motor and
remove.

Handset and cradle removal

1. Lift machine.
2. Remove one screw located under the handset on the base.
3. Unplug handset cable.
4. Depress the two clips located on the handset cradle and
remove.
4-24
Service Manual
"Top cover
4-5.
"Print engine removal" on