Adjusting The Seat Depth Without Replacing The Seat Support Plate - Invacare Storm 4 User Manual

Invacare® Storm®⁴
Holes used
Seat in front seat
depth frame order
in cm no.: 1524550
38 6 & 7
5 & 7
41
43 4 & 6
43 4 & 6
46 3 & 5
48 2 & 4
48 2 & 4
51 1 & 3
53 1 & 2
2. Adjust the seat depth as described in the following chapter:
- If the seat support plate does not need to be replaced, please
refer to chapter 6.13.3 Adjusting the seat depth without replacing
the seat support plate, page 50.
- If the seat support plate does need to be replaced, please refer
50
Holes used Seat
in rear seat support
frame order plate
no.: 1524555 required
A & B SHORT
order no.
A & C
1526437
A & C
A & C MEDIUM
order no.
A & C
1526438
A & C
A & C LONG
order no.
A & C
1526439
B & C
to chapter 6.13.4 Adjusting the seat depth with replacing the seat
support plate, page 51.
6.13.3 Adjusting the seat depth without replacing
the seat support plate
Exploded drawing of seat support
Disassembly:
1. Remove the armrests.
2. Remove the seat cushion.
3. Remove the cover plates (1).
4. Undo and remove the two Allen screws (8) which are located
on the side at the rear of the seat support plate, and connect
these to the crossmembers (4).
1529686-P