SERVICE MANUAL
6.5.4
Anti-tipper wheels
Requirements:
· 2 open spanner 10 mm
Removing the anti-tipper wheel:
·
Loosen the screw (1) with a 10 mm open spanner. Secure the axle (4) against slippage using a
second 10 mm socket open spanner.
·
Remove the screw (1) and the axle nut (2).
·
Pull the wheel (3) off of the axle.
·
Replace the wheel.
Assembling the anti-tipper wheel:
·
Assembly of the wheel is carried out in the reverse order.
·
Tighten the self-securing axle nuts just tight enough that the wheel can still rotate without
resistance.
36
®
Invacare
- Colibri