Updating Software - Invacare Colibri Service Manual

®
Invacare - Colibri
6.2

Updating software

The driving programs for electric wheelchairs are continually updated and improved by Invacare®.
For this reason, you should check whether the version number is still up to date each time a
wheelchair comes in for repairs, and also during regular inspections.
If a newer version is available, the driving program must be updated. The procedure for updating
the driving program is described in the user manual of the Wizard software.
Note
The electronic system is supplied with a standard drive program. If the driving program has been
customised, you have to perform this customisation again, after installing the new driving
program.
WARNING!
Any changes to the drive program can affect the driving characteristics and the tipping
stability of the mobility aid!
· Changes to the drive program may only be carried out by trained Invacare® specialist
dealers!
· Invacare® can only give a warranty for safe mobility aid driving behaviour - especially tipping
stability - for unaltered standard drive programs!
Pre-requisites:
· Dynamic® Wizard software
· User manual for the Wizard software
· For further information on other requirements - such as the minimum system configuration of
the PC to be used for programming, necessary programming cables - see the user manual of
the Wizard software.
Note
Programming or updating the software takes place via the scooter charging socket.
SERVICE MANUAL
25