Appendix; Troubleshooting; Status Led; Reset And Restore - LevelOne FCS-1060 User Manual

Appendix

A. Troubleshooting

Status LED

The following table lists the LED patterns in general.
Condition
Loading system after power on
During booting procedure
Detecting and setting network
After network is setup (system up)
During the upgrade firmware process
Enable audio

Reset and restore

There is a button in the back side of the Network Camera. It is used to reset the system or restore
the factory default settings.
RESET: Click on the button.
RESTORE:
1. Press on the button continuously.
2. Wait for all LED blink fast.
3. Free the button.
Restoring the factory defaults will erase any previous settings.
B. URL commands of the Network Camera
For some customers who already have their own web site or web control application, the Network
Camera can be easily integrated through convenient URLs. This section lists the commands in
LED color
Steady red
Steady green, blue and red
Steady green and blue. Blink red till IP address is
confirmed
Blink green every second and steady red
Blink green every second and fast blink red
Steady blue. Disable audio will turn off blue LED.
48