Add Password To Prevent Unauthorized Access - LevelOne FCS-1060 User Manual

in the "Troubleshooting" chapter of the Appendix.

Add Password to Prevent Unauthorized Access

The default Administrator's password is blank and the Network Camera initially will not ask for any
password. The Administrator should immediately implement a new password as a matter of
prudent security practice. Once the Administrator's password is saved, the Network Camera will
ask for the user's name and password before each access. The Administrator can set up a
maximum of twenty (20) user accounts. Each user can access the Network Camera except to
perform system configuration. Some critical functions are exclusive for the Administrator, such as
system configuration, user administration, and software upgrades. The user name for the
Administrator is permanently assigned as "root". Once the password is changed, the browser will
display an authentication window to ask for the new password. Once the password is set, there
is no provision to recover the Administrator's password. The only option is to restore to
the original factory default settings.
12