Set Server Parameter Values - LevelOne FCS-1060 User Manual

Response:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: 33\r\n
\r\n
network.ipaddress=192.168.0.123\r\n

Set server parameter values

Note: This request require administrator access
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/setparam.cgi? [nosync=<value>&]<parameter>=<value>
[&<parameter>=<value>...][&return=<return page>]
parameter value
<group>_<name>. value to assigned
<return page>
return
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: <length>\r\n
\r\n
<parameter pair>
where <parameter pair> is
description
Assign <value> to the parameter <group>_<name>..
Redirect to the page <return page> after the parameter
is assigned. The <return page> can be a full URL path
or relative path according the the current path. If you
omit this parameter, it will redirect to an empty page.
(note: The return page can be a general HTML
file(.htm, .html) or a server script executable (.vspx)
file. It can not be a CGI command. It can not have any
extra parameters. This parameter must be put at end of
parameter list)
50