Resetting The Security Code; Installation - Radio Shack 65562 Owner's Manual

49-329.fm Page 13 Thursday, June 1, 2000 7:46 AM
es the remote signals (see "Arming and Disarming
the Sensor Alarm" on Page 19).

RESETTING THE SECURITY CODE

If you ever forget your security code, you can easily
reset it to the default code (1234) by removing and re-
installing the main unit's batteries (see "Installing Bat-
teries" on Page 5).
Remember that after removing and reinstalling batter-
ies in the main unit, you must program the main unit
to recognize the remote control's signals (see "Re-
mote Control" on Page 11).
Note: The alarm is disarmed after batteries are in-
stalled.
ˆ

Installation

To help you avoid false alarms, mount your sensor
alarm's main unit:
• where it will not be in direct sunlight
• away from heat sources, such as space heaters,
radiators, and exposed light bulbs
Installation
13