Radio Shack 65562 Owner's Manual page 20

49-329.fm Page 20 Thursday, June 1, 2000 7:46 AM
To have the alarm's siren sound about 30 seconds af-
ter the sensor detects motion, set the slide switch to
.
DELAY
To arm the sensor alarm, press
or on the remote control. At either the
setting, you have 10 seconds to leave the sensor
LAY
alarm's coverage area. During this exit delay, the
main unit beeps every second and its red indicator
flashes. At the end of the 10-second delay, the main
unit beeps twice, the indicator flashes about every 5
seconds, and the sensor alarm is armed.
PANIC ARM
1 2
6 7
If you arm the sensor alarm in the
when the alarm detects motion in the protected area,
the alarm siren sounds immediately and the indicator
stays on.
If you arm the sensor alarm in the
when the alarm detects motion in the protected area,
20
Operation
on the main unit
ARM
or
INSTANT DE-
PROG
CODE LEARN PROG
3 4 5
8 9 0
setting,
INSTANT
setting,
DELAY