»
MAINTENANCE WORK ON CHASSIS AND ENGINE
Check/set distance of the magnetic sensor
The distance between the magnet [2] and the sensor [1] must be 2-4 mm,
otherwise malfunctions on the speedometer might occur.
This distance can be corrected by screwing the sensor [1] in or off.
1
2
1
38
Replacing the headlight lamp/parking light lamp
4
Loosen both rubber bands and tilt the headlight mask to the front. Pull the
5
parking light lamp with holder [3] carefully out of the reflector. Pull
connector [4] off the headlamp and remove rubber cap [5]. Disengage retain-
ing clip and take the bulb out of the reflector. When changing the parking-
light lamp, simply pull it out of the holder.
3
4
Slightly depress the bulb, turn it approx. 30° counterclockwise and pull it out
of the socket.
To mount the lamp reverse the worksteps indicated above.