Holiday Mode - Danfoss TP7001 User Manual

Alternatively, Thermostat Mode can be selected and deselected via
the MODE button.
Thermostat/Auto modes can also be toggled remotely via the
Remote Override, see page 22.
When in Thermostat mode, the hand symbol is shown to indicate this
is a manual setting mode.
GB
NOTE: The frost protection shield symbol will also be displayed when
the selected temperature is equal to or less than the programmed
frost protection setting.

2.3 Holiday Mode

The TP7001 can control at a constant low temperature while you are away
on holiday, returning to your programmed settings at a specifi ed date.
Press and hold the DAY button for at least 3 seconds (the display will
show a suitcase and a date with the year fl ashing - Fig 27). Now you
can set the date of your return.
The YEAR number will fl ash, use the Λ or V buttons to set the year
of your return.
Use the - or + buttons to move to MONTH. The MONTH number will
fl ash (Fig 28). Then use Λ or V to set the month of your return.
Use the - or + buttons to move to DAY in month of your return. The
DAY number will fl ash (Fig 29). Then use the Λ or V button to set on
which day in month you will return.
Fig. 27 Fig. 28 Fig. 29
Danfoss Heating
19