Safety Lock; Away Mode; Present Floor Temperature - Danfoss ECtemp Next Plus Installation Manual

again to shift to weekdays and use < or > for select-
Press
ing right day
Finish timer setting by pressing any other button or wait for
automatic exit after 6 sec. without operation
4.6

Safety Lock

Press M and > simultaneous to enable Safety lock.
To release safety lock press M and > simultaneous again.
4.7

Away Mode

Press M to get into Away mode
is showed in the display
Changing the desired temperature in Away mode
Press < or >.
SET is showed in the display
Adjustment in steps of 0.5°C
Press M to exit Away mode again
4.8

Present Floor Temperature

Press M and hold – Press < within 6 sec also
start to ash and current oor temperature is be-
ing displayed.
14
Danfoss ECtemp Next Plus
Installation Guide