Advanced Functions; Mode; Thermostat Mode - Danfoss TP7001 User Manual

2.0 Advanced Functions

2.1 Mode

The MODE button allows the operation of the programmed events
to be altered between:
GB
1. Auto mode
a.
b.
c.
2. Allday mode
a.

3. Thermostat mode

a. Thermostat mode means that all time profi les are ignored
and the temperature is controlled at whatever temperature is
manually set by the user.
Note: If set for two events per day, then Auto and Allday are eff ectively
the same and so the MODE button will only change between Auto
and Thermostat (Off ) modes.
When in Auto or Allday modes, the clock symbol is displayed to
indicate the programmed events will be followed.
2.2 Thermostat mode
The TP7001 can be converted to control at a constant user selected
temperature, instead of following the set programme.
Press and hold the  and  buttons together until the
display changes to the colon fl ashing and default frost
temperature (5°C).
Press the  or  buttons to alter temperature as
required.
NOTE: The unit will remain in thermostat mode until 
and  are pressed and held together again.
18
6 events
4 events
2 events
Only the fi rst and last programmed events run
TP7001