Table of Contents
Advertisement
P03
Maximum oor
temperature
P04
Frost protection
P05
Frost protection
setpoint
P06
Timer display option
P07
Room temp. display
option at shutdown
* It will be possible to use only a room sensor. However, this option is not recom-
mendable due to an increased risk of overheating the oor. See 4.9 Change to
Room control only
** P03 appears on relevant temperature control mode. See 4.10 Extending
Maximum oor temperature limitations to 45°C
4.3
Advanced Programmable Timer
The Advanced Programmable Timer mode enables the set-
ting of a timer-controlled program for automatic comfort
temperature, and an energy-saving lower setback tempera-
ture if standard room comfort temperature is not required.
The function consists of 2 programs:
P1 with 4 events in 5 days
(Mon. Tue. Wed. Thu. Fri.)
10
Danfoss ECtemp Next Plus
20-30˚C (only for 01 in
P02)**
01: Enable; 02: Disable
5-9˚C
01: 24h; 02 12h
01: No display surrent
temp.;
02: Display current temp.
P2 with 4 events in 2 days (Sat.
Sun.).
35˚C
01
5˚C
01
01
Installation Guide
Advertisement
Table of Contents
