Sony MEX-XB100BT Service Manual page 11

5. Input the Bluetooth Local Name (BL_NAME).
(Input the model name with the keyboard on the smartphone,
or tap the "List" on the screen of the smartphone and select the
model name)
Bluetooth Local Name
Bluetooth Device Addres
6. Input the Bluetooth address (BD_ADDR).
(Input the Bluetooth address (BD_ADDR) that written on the
BT module label with the keyboard on the smartphone, or tap
the "QR" on the screen of the smartphone and read the barcode
with the camera of the smartphone)
MEX-XB100BT
Bluetooth Device Addres
7. Tap the "Write" on the screen of the smartphone, in the state
that unchecked the box "Read-only".
MEX-XB100BT
48D2242F241A
8. Touch the N-mark part of the smartphone to the N-mark part of
the unit.
9. Check that "Completed!" is displayed on the screen of the
smartphone.
Note 2: When "Completed!" is not displayed on the screen of the smart-
phone, refer to "3. Error Display" on the page 12.
10. End the NFCtagWriter application on the smartphone.
11. Check the operation of connecting with the smartphone by one
touch (NFC).
"OPERATION CHECK OF THE NFC AFTER
(Refer to the
COMPLETING THE REPAIRS" on the page 7)
12. Start the NFCtagWriter application on the smartphone.
13. Tap the "Write" on the screen of the smartphone.
14. Check the box "Read-only" on the screen of the smartphone,
and tap the "Write" on the screen of the smartphone.
MEX-XB100BT
48D2242F241A
MEX-XB100BT
– Continued on next page –
11