5. Link Upper
A: REMOVAL
S201103A18
1) Loosen wheel nuts. Lift-up vehicle and remove
wheel.
2) Use transmission jack to support rear arm hori-
zontally.
(1)
Rear arm
(2)
Transmission jack
3) Remove bolt securing link upper to sub frame.
4) Remove bolts which secure link upper to rear
arm and detach link upper.
LINK UPPER
S201103
B4M1806B
B4M1875
B4M1857
B: INSTALLATION
Install in the reverse order of removal, observing
the following instructions.
CAUTION:
¼ Using transmission jack, support rear arm
horizontally, install link upper and tighten nuts
to specified torque.
(1)
Rear arm
(2)
Transmission jack
¼ Tighten nut when installing adjusting bolt.
¼ Replace self-locking nut.
NOTE:
Check wheel alignment and adjust if necessary.
RS-19
Rear Suspension
S201103A11
B4M1806B