Rear Arm - Subaru LEGACY 2001 Service Manual

4. Rear Arm

S201105
A: REMOVAL
S201105A18
1) Lift-up the vehicle and remove rear wheel.
2) Remove bearing unit.
<Ref. to DS-22 REMOVAL, Hub Unit Bearing.>
3) Remove bolt securing parking brake cable
clamp to rear arm.
4) Remove bolt securing brake hose to rear arm.
5) Remove bolt securing ABS sensor to rear arm.
6) Using a flare nut wrench, disconnect brake pipe
from wheel cylinder. (Drum brake model only)
CAUTION:
Cover open end of wheel cylinder and pipe to
prevent entry of foreign particles.
REAR ARM
7) Suspend the back plate from sub frame.
8) Remove nut securing stabilizer link to rear arm.
B4M1790
9) Remove bolt securing shock absorber to rear
arm.
B4M1791
10) Use transmission jack to support rear arm
horizontally.
B4M1792
RS-15
Rear Suspension
B4M1793
B4M1871
B4M1794
B4M1795