Subaru LEGACY 2001 Service Manual page 26

Rear Suspension
F: DISPOSAL
S201104A07
CAUTION:
¼ Completely discharge the gas from the
shock absorber before disposal. Follow the
disposal procedure outlined below.
¼ Do not disassemble shock absorber or place
into a fire.
¼ Drill holes before disposing of shock
absorber.
¼ Before handling shock absorber, be sure to
wear goggles to protect eyes from gas, oil
and/or filings.
1) Place shock absorber on a flat and level sur-
face with piston rod fully extended.
2) Using a 2 to 3 mm (0.08 to 0.12 in) dia. drill, drill
30 mm (1.18 in) deep holes in areas shown in the
figure.
Without self-leveling suspension
With self-leveling suspension
REAR SHOCK ABSORBER
B4M1864B
B4M1865B
RS-24