Sharp ER-A460 Programming Manual page 14

[JOB#996, 998] IR data send/receive
(ECR↔ECR, ECR↔ER-02FD)
[JOB#996] IR data send
All data
996
X
X : SSP = 0
•
Send to ECR (IrDA)
(Enable baud-rate : 115200bps,
•
Send to ER-02FD + CE-IR2 (CE-IR4)
(Enable baud-rate : 19200bps)
•
Send to ECR (ASK)
(Enable baud-rate : 57600bps, 38400bps,
[JOB#998] IR data receive
998
TL
ST
•
Receive from ECR (IrDA)
(Enable baud-rate : 11500bps, 57600bps,
•
Receive from ER-02FD + CE-IR2 (CE-IR4) : ASK
(Enable baud-rate : 19200bps)
•
Receive from ECR (ASK)
(Enable baud-rate : 57600bps, 38400bps,
TL Send to ER-02FD or ECR(ASK)
ST Send to ECR(IrDA)
: IrDA
57600bps, 38400bps,
19200bps, 9600bps,
4800bps, 2400bps)
: ASK
: ASK
19200bps, 9600bps,
4800bps, 2400bps)
Receive from ER-02FD or ECR(ASK)
Receive from ECR(IrDA)
: IrDA
38400bps, 19200bps,
9600bps, 4800bps,
2400bps)
: ASK
19200bps, 9600bps,
4800bps, 2400bps)
– 13 –