Swann Advantage series Manual page 9

V DVR Setup
Configure which channel is allowed to record.
V DVR Setup
There are two modes for video recording,
Each Mode
Loop Function With system in play back mode or recording, press the
"QUAD" button and hold for three (3) seconds to make each video channel
enlarge to full screen.
The full screen will be displayed for five (5) seconds.
The loop will continue until any button is pushed.
Quad Mode The DVR will compress and record all 4 video channels
V DVR Setup
The DVR will compress and record each video channel
separately therefore, the user can enlarge a single
channel to full screen display. For example, the user can
turn off the record function of CH-1 and CH-2 and then
the system will only record CH3 and CH4 vid
Press " CH1", "
between channels when playing back recorded video.
into one file, therefore the user cannot enlarge a si
channel to full screen in play back mode. User can't use
the video loop function in this mode.
— 9 —
5.3 Record Select
5.4 Record Mode
CH2", " CH3", "
5.5 Record Frame Rate
eo.
CH4" to switch
ngle