Swann Advantage series Manual page 10

Record frame rate will affect the movement of object in recorded video.
More frames per second gives more smooth movement and uses more hard
disk space.
System default value is 25 fps for PAL (NTSC is 30fps), that means the
system will record 25 frames per second. User can set frame rate as for PAL
25,12,8,6,4,3,2,1 frames per second (NTSC is 30,15,10,7,5,4,3,2,1)
V DVR Setup
There are three level of record quality, High, Normal and Low.
Higher quality uses more hard disk space.
Record frame rate, record quality and hard disk space will affect total
record time of DVR system.
V DVR Setup
User can setup video record method by time, Sensor Triggered or Motion
Triggered and Continuous Recording.
RECORD SCHEDULE
TTTAAATTTTTTAAAATTTTTTTT-
│ │ │ │ │
0 3 6 9 12
PRESS UP DOWN . THEN(SELECT)
PRESS(MENU) TO EXIT
V DVR Setup
│ │ │ │
15 18 21 24
— 10 —
5.6 Record Quality
5.7 Record Schedule
-
" " No Record
"T" Continuous, (System default)
"A" Sensor Triggered or Motion Triggered.
Works with many kinds of external
sensor equipment like PIR, Gas sensor.
DVR will not record video until external
sensor is triggered and outputs signal to
notify DVR during this specified period of
time.
Button function:
Up Down :move the prompt
:
Select Select Method.
5.8 Sub Menu-Auto Record