Swann Advantage series Manual page 15

SENSOR SETUP
CHANNEL-1 TYPE:NORMAL-OPEN
CHANNEL-2 TYPE:NORMAL-CLOSE
CHANNEL-3 NOT INSTALLED
CHANNEL-4 NOT INSTALLED
PRESS UP DOWN . THEN(SELECT)
PRESS(MENU) TO EXIT
If the sensor connected to the DVR is triggered by an intruder, then the
DVR will automatically start recording process.
Note: the recording method is set to alarm recording in the first place.
Push the UNLOCK BUTTON to insert and pull out the wire
Install example diagram:
Sensor Setup
There are 3 different modes for sensor setting:
NOT INSTALLED, NORMAL-CLOSE and
NORMAL-OPEN.
It depends on what type of external sensor
you are using. If sensor's output is
NORMAL-OPEN then select NORMAL-OPEN
mode in DVR.
Sensor Input 1 2 3 4
PTZ
— 15 —
Alarm Out