Final Steps; Proper Installation Sequence (Cfx24); Proper Installation Sequence (Cfx32) - Vermont Castings CFX24NV Installation And Operating Instructions Manual

CFX VENT FREE FIREPLACE SYSTEM
Before you begin — This unit is supplied with a set of three
ceramic fi ber logs. Do not handle these logs with your bare
hands. Always wear gloves to prevent skin irritation from
ceramic fi bers. After handling logs, wash your hands gently
with soap and water to remove any traces of fi bers.
WARNING: The positioning of the logs is
critical to the safe and clean operation of
this heater. Sooting and other problems
may result if the logs are not properly and
fi rmly positioned in the appliance. Never add
additional logs or embellishments such as pine
cones, vermiculite or rock wool to the heater.
PROPER INSTALLATION SEQUENCE
(CFX24)
Figure 21
1. Install the rear log (#3) on back of burner.
2. Install the right log (#1) on burner pins on right side of
burner.
3. Install the left log (#2) on burner pins on left side of
burner.
Right Log #1
Left Log #2
Burner
Pins
Figure 21 -
Log Placement CFX24
18
approved with this heater may result in property
damage or personal injury.
PROPER INSTALLATION SEQUENCE
(CFX32)
Figure 22
1. Install front right log (#1) on two pins on right side of
burner.
2. Install left front log (#2) on two pins on left side of
burner.
3. Install back log (#3) on back of burner.
4. Install right middle log (#4) on two pins on burner. Rest
right end of right middle log on the right front log.
5. Install left middle log (#5) on two pins on burner. Rest
left end of left middle log on left front log.
Left Middle
Log #5
Left Front
Rear Log
Log #2
#3
Pins
Burner
Pins
Pins
LG588
Figure 22 -
Log Placement CFX32
WARNING: Failure to position the parts
in accordance with these diagrams or
failure to use only parts specifically
Rear Log #3

FINAL STEPS

Right
Middle
Log #4
Right
Front
Log #1
Pins
Pins
LG589
20301726