Optional Firebrick Panels - Vermont Castings CFX24NV Installation And Operating Instructions Manual

CFX VENT FREE FIREPLACE SYSTEM

OPTIONAL FIREBRICK PANELS

1. Remove optional fi rebrick panels from packaging. Check
to see that you have the following:
•
Firebrick panels, 3
•
Retainer brackets, 2
• B
lack screws, 2
If any part or parts are missing, contact dealer where
you bought fi replace.
2. Turn off fi replace and allow to cool.
Rear Firebrick
Panel
Bracket Tabs
Figure 14 -
Install Rear Firebrick Panel
12
3. Remove fi replace screen (Refer to page 11, fi gure 13)
and logs.
4. Place rear fi rebrick panel on back wall of fi rebox. Set
bottom of panel behind the bracket tabs of the grate.
Figure 14
5. Place one of the side fi rebrick panels in cabinet. Line
up the hole in the retainer clip with the hole inside the
fi rebox. Using Phillips screwdriver, attach the retainer
bracket to inside of fi rebox. Figure 15
6. Repeat step fi ve for the other fi rebrick side panel.
Retainer
Hole
Clip
Side
Firebrick
Panel
Screw
Figure 15 -
Install Side Firebrick Panel
FIREPLACE INSTALLATION
20301726