Table of Contents
Advertisement
F
INISHING THE
1. Tuck connections neatly into ceiling outlet box.
2. Slide the canopy up to ceiling and over the 2 screws on
the hanger bracket. Rotate canopy clockwise. Next, while
holding the canopy with one hand, slide the canopy
screw cover plate over the screws and rotate clockwise
until tight. NOTE:
NOTE: adjust the canopy screws as necessary
until the canopy and canopy screw cover plate are snug.
WARNING:
WARNING: Make sure the hook on the hanging bracket
properly sits in the groove in the hanger ball before
attaching the canopy to the bracket by turning the housing
until it drops into place.
B
A
LADE
TTACHMENT
Step 1. Insert the blade through the blade slot in the
decorative housing. Align the holes in blade and blade arm,
place the blade arm plate on blade as showing in Figure 12,
making sure the holes are also aligned and secure with lock
washers and screws provided.
Step 2. Repeat process with other blades.
NOTE:
NOTE: Cordless power screwdrivers are NOT
as they tend to strip the heads of the screws and usually will
not fully compress the lock washers on the motor screws. Use
a large flat blade screwdriver for final tightening to fully
compress the washers. This will help ensure proper alignment
of the blades and noise-free, wobble-free running.
I
NSTALLATION
NOT recommended,
Hanger
Bracket
Canopy
Canopy Screw
Cover Plate
Screws
8
Ceiling Fan
Outlet Box
Screws
Slot
Blade
Advertisement
Table of Contents
