Table of Contents
Advertisement
I
NSTALLATION
NOTE: Be sure to turn the power off before installing.
1. If installing light kit, attach to switch housing per instructions supplied with light kit. See "Electrical
Connections" for hook up of light kit. Carefully remove light kit plug in bottom of switch housing.
2. Connect the plug and receptacle and make sure side buckle snaps in place.
3. Attach the switch housing to switch housing hub by aligning keyhole slots and tabs in both.
4. Align the side screw hole in switch housing hub. Insert and tighten side screw.
5. Turn the power on. Your fan is ready for operation.
Connector (plug)
with Side Buckle
Connector (receptacle)
Keyhole Slot
Hole for
side screw
O
R
F
EMOVABLE
Pull Chain
S
WITCH HOUSING
9
Switch Housing Hub
Side Screw
Switch Housing
Reverse Switch
Light Kit (optional)
connects to bottom
of switch housing
Advertisement
Table of Contents
